3.1 Sampling module

Theo Wilson -

When the sampling module is connected to the Lonestar and in use, it appears as shown in the figure below. The filter heater, heated lid and bottle heater each have a wire already attached to them with a plug that must be connected at the back of the heater control box. The system is fixed to the Lonestar by a ¼” inch Swagelok pipe connection and a support screw on the supporting swing arm.

Figure_1.png

Picture of sampling module

Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.
Powered by Zendesk