Billy Boyle
Articles
-
EasySpec Manual and Quickstart Guide
EasySpec refers to a suite of programs used to determine, from DF matrices taken with a Lonestar, whether or not a chemical of interest is present. EasySpec can also be used to create calibrations ...
-
Will my application work?
In the below table is a range of user requirement specifications for an application and in terms of FAIMS is this a difficult spec point to reach User requirement Spec Easy Spec ...
-
Lonestar Spectra File Converter
This utility allows you to convert Lonestar data files from binary to ASCII, which can then be loaded into standard data analysis packages e.g. Excel, MATLAB, R V2 ASCII converter download (145M...
-
Lonestar Training Data
Here is Lonestar Example Data used in Training. A copy of the presentation handout, including the tasks performed during the training, are also attached
-
OVG-4 Temperature and Flow Recalibration Procedure
The purpose of this document is to provide instructions for checking and calibrating the temperature of the Permeation Oven and Sample Outlet flow of the Owlstone Vapour Generator (OVG-4), P/N 00-0...
-
Troubleshooting Contamination of Lonestar Systems
This guide will help you identify and resolve any contamnation issues you may be seeing with your Lonestar set-up
-
Why does my Permeation source calibration not go through a Zero Intercept
Hi, In the presentation Billy gave last friday he said that the calculation of the permutation rate was simply the slope of linear best fit of a plot of mass loss against time. However in the exam...
-
OVG-4 Labview driver downloads
The OVG-4, OHG-4 and OFC all use a 3200 Series Temperature / Process Controller from Eurotherm to control temperature and flow. As well as controlling the control manually, there are software drive...
-
Calibration of Permeation Tubes
This video outlines the basic process for calibration of permeation tubes.